“Dye-ing” to grow indigo plants?

By Martha Keehner Engelke, NC State Extension Master GardenerSM volunteer of Durham County

Interest in natural dyes is undergoing a resurgence as people look for environmentally conscious and sustainable ways to make clothing and household goods. I didn’t know much about the topic but this summer I had two experiences that gave me a beginner’s knowledge about a plant that has been used for centuries to dye textiles: Indigo.

My first experience occurred when I volunteered at the Clover Bud Camp. The camp is a joint venture between the Durham County Master GardenersSM and the Durham County 4H program. Children between the ages of 5 and 8 years old learned about “Art in Nature“. One of the sessions was on using indigo to dye fabric.

River Takada, Mixed Media and Fiber Artist, from Durham, North Carolina demonstrates “shibori”, She brought several examples (see the table in the first picture) that illustrate the shibori method. (Image credit: Martha Engelke)

During the class, the children had an opportunity to not only dye fabric but to learn about Shibori, a traditional Japanese method that involves folding and binding the fabric to create patterns when the fabric is dipped in the indigo. River mixed the dyes in large buckets using indigo that had previously been extracted from the plants. Extraction is a process that requires a large crop of indigo and a lot of time (several weeks).

The second experience was attending a workshop offered through Piedmont Fibershed, a nonprofit organization dedicated to building a regional fiber system centered around local fibers, local dyes, and local labor.  This workshop was led by Bethany Joy Hebbard and the focus was on growing and using fresh indigo leaves rather than dye that had been previously extracted from plants.

The History of Indigo

Indigo was used in China 3,000 years ago and in Egypt more than a thousand years before that. The most common uses were to dye textiles or make cosmetics. However, indigo has also been used for medicinal purposes. Neurological disorders, dental problems, inflammation, and skin diseases have been treated with indigo and indigo is thought to have antimicrobial properties and aid in the healing of burns.

In the United States, indigo became a commercial crop in the 1740’s and was grown on plantations in South Carolina, Georgia and Florida. Growing indigo was a very labor intensive process. In 1870, two scientists in Germany (Adolf von Baeyer and Adolf Emmerling)  synthesized indigo which led to a significant decrease in the growing of natural indigo. Although synthetic indigo still dominates the market, there has been a resurgent interest in natural indigo dye because it is more sustainable and environmentally friendly.

The precursor to indigo is indicin which is found in the leaves of the plant. Through a process of oxidation and fermentation the indican is transformed into a blue, water-insoluble indigo dye. The most common colors associated with indigo are blue and green but by using heat during the extraction process it is possible to activate another chemical (indirubin) which will produce red and earth tones. Although many plants are used to dye textiles, one of the advantages of indigo is that it doesn’t require a mordant (fixative) as long as the cloth is scoured (treated with soda ash or sodium carbonate) before applying the dye.

There are varieties of indigo from China, Guatemala, and other tropical environments. These varieties vary considerably in their indigo content. The variety that is most often used to dye textiles is Japanese Indigo (persicaria tinctoria) because it yields the most dye.

Growing Japanese Indigo (persicaria tinctoria)

Persicaria tinctoria (also known as polygonum tinctorium) is a member of the Polygonaceae family. It is hardy in zones 10-12, but in our area it is considered an annual. Seeds can be started indoors 4-6 weeks before the last average frost. The seeds should germinate within two weeks but occasionally it takes a month. Seeds can be harvested from existing plants but it is unlikely that they will germinate after the first year and long-term storage is not recommended. Seeds can also be sown directly outdoors after the threat of frost has passed. They grow in any soil but clay loam seems to be the best. Adding a bit of guano or cow manure to the soil enhances growth and using a nitrogen fertilizer during the growing season is recommended. Few diseases affect the plant but it does do best in the sun with regular, frequent watering. Remember, it is basically a tropical plant.

Persicaria tinctoria can be grown from seed or cuttings. The first picture was taken in an outdoor garden while the second is a potted plant grown from cuttings. The third picture illustrates the leaves and flower. (Image credit: Left: I Naturalist UK, CC-BY-NC; Middle and Right, Martha Engelke)

Persicaria tinctoria is also very easy to propagate from cuttings, which is what I did. The workshop was held in July and it was too late to grow the plants from seed. Bethany had a field of plants which she shared with us. I took several cuttings, put them in a pot indoors, gave them plenty of water and sunshine and they have done well. I found that they do need to be watered at least every 1-2 days.

Once the plants are established, you can harvest the leaves 2-4 times before they flower and set seed in mid to late September. Once they have set seed, the amount of indigo in the leaves is greatly reduced. To harvest the leaves, cut the plants plants about 6-8 inches from the ground leaving a few leaves at the base. Keep them moist and use them within 24 hours if you are planning to use them for fresh leaf dying.

Fresh-Leaf Indigo Dying

Before using the leaves, it is important that the fabric is scoured (boiled with soda ash at a concentration of 1-2% of the weight or the fabric) for 30 minutes and then soaked in soy milk. This will help to remove natural gums and waxes and “fix” the dye especially when using bath methods.

There are two ways to dye with fresh indigo: abrasive methods and baths. The abrasive method is easy and straight forward. Using dry fabric, one can hammer (Tataki zome) the leaves once they have been affixed to the fabric with packing tape or you can use a stencil.

In the stenciling method, after stabilizing the fabric, affix the stencil to the top of the fabric. Then, take 4-5 indigo leaves and stack them so they look like a cigar. Keep refolding and replacing leaves as your leaves disintegrate. It is best to use a stencil made of hard plastic or wood rather than one made of cardboard. Contrary to what I thought, stencils with smaller spaces rather than ones with wide open spaces worked better.

The bath technique includes several methods. You can make a salt marsh by sprinkling a few teaspoons of salt over a bowl of fresh leaves and then use your hands to agitate the leaves until the liquid is released. Continue to do this for 10-15 minutes or until the fiber stops getting darker. Rinse the fiber in cool water and dry out of the sunlight.

Another bath approach is to place your indigo leaves in a blender and fill it about halfway with cold water. Blend until the mixture is frothy. Strain the mixture over a tea towel and squeeze the liquid into a bowl. Submerge the cloth for about 15 minutes, stirring if needed. You can repeat the process if you want a deeper color. Dry the fabric out of direct light. Although indigo is not toxic, I chose to wear gloves because the dye is a bit difficult to remove from your hands.

The first sample was created using the stenciling method, the middle picture represents the hammering method and the samples in the picture on the right were made using a bath. (Image credit: Martha Engelke)

Using fresh indigo to dye fabric has many advantages. It is a low cost, straightforward process that can be completed by an individual or it can be a fun project with children. You need only a few plants and resources. Of course there are constraints. It is a seasonal activity and after my plants go to seed, I will have to wait until next year to grow more fresh indigo (although I am going to see if I can keep it growing as a house plant). To get the best results, you need to work fairly quickly and especially with the abrasive methods, the results can vary based on how well you are able to hammer or the type of stencil you use. The results will also vary depending on the freshness of the indigo. If you wait until the plants start to set seeds, your results may be disappointing. However, I am dye-ing to try it again!

My first project with fresh indigo using a stencil. Next project? Deciding what to fill them with and who to give them to!

Image credit: Martha Engelke

Resources and Additional Information

This article summarizes the historical and cultural background as well as the identification distribution and uses of indigo.

https://edis.ifas.ufl.edu/publication/EP642

If you are interested in growing larger amounts of indigo and extracting the dye for use in bigger projects, the story of how an artist in South Carolina did this is inspirational.

https://sc.edu/uofsc/posts/2022/11/carolinian_indigo_harper.php

Susan Dye (appropriate name, right?) has experimented with growing different varieties of Japanese indigo as well as other indigo plants. She shares the results of her experimentation on her blog and discusses the sociopolitical implications of the resurgence of indigo dyeing.

To learn more about the artists and the classes that they provide visit their websites:

River Takada: www.rivtak.com

Piedmont Fibershed: https://piedmontfibershed.org/home/

Short Link: https://wp.me/p2nIr1-4Zu

Give a Thought to the Pot

By Deborah Pilkington, NC State Extension Master GardenerSM volunteer of Durham County

Container gardeners, me included, give a lot of thought to choosing which plants will go into the containers.  But not a lot of thought is given to the containers themselves.  Yet, to have a successful container garden in full sun, shade, or anywhere in between, the choice of pot is as important as the choice of plant.  So, for the next few minutes, we’re going to look at factors that should be considered for container choices, especially in our newly-designated hardiness zone 8. 

Porosity

Examples of porous pots. (Image credit: Deborah Pilkington)

Some containers, such as the familiar terra cotta (“baked earth” in Italian) are very porous, meaning the pot draws water from the potting media through its walls. Other porous materials include hypertufa, unglazed ceramic, and clay. Because of this, these porous pots may require more frequent watering, something to think about if they are going to be in full sun. Less porous choices would be wood or concrete, and the least porous pots are made of metal, fiberglass, plastic, or glazed ceramic.  That means they are going to help the potting mix conserve water.  

Size

The smaller the pot size, the more frequently it will need to be watered, sometimes more than once a day. A larger container is going to be heavier and less likely to tip over. Larger containers will require less frequent watering but can be a bear to move from location to location…unless you own one of these (see the photo below). And the cost of filling the container with potting mix is also a consideration.

The difficulty of moving very large pots! (Image credit: Deborah Pilkington)

Fragility

If a container is fragile and susceptible to cracking in cold temperatures, it will need to be moved to a sheltered area for winter.  Terra cotta, clay, unglazed ceramic, and hypertufa are all fragile materials. The sturdiest are metal, plastic, concrete and wood.

Heat Holders

Metal containers, and dark-colored containers are heat holders in full sun. They can even be hot to the touch! Potting mix in these containers can rise to well over 100°F. Keeping roots well-watered, unless you are growing cactus, is a must. 

Shape

If you are going to grow a shrub or tree in a container, at some point the plant will need to be lifted from the container to be root pruned—an onerous but necessary task.  So, for shrubs or trees you want to choose a container that is wider at the top (below on the right) rather than narrower (below on the left) to make lifting easier. 

(Left) This container is more narrow at the top and would make it difficult to remove a shrub that had grown in the pot. (Right) In contrast, this pot is wider at the top than the bottom and it would be easier to remove a shrub that had been grown in the pot. (Image credit: Deborah Pilkington)

Drainage

Good drainage is a must in container gardening.  If the container doesn’t have drainage holes, you can add them using a drill and the appropriate drill bit. And to ensure correct drainage, don’t put anything in the bottom of your container but soil mix. Adding gravel or covering the hole with broken terra cotta not only defeats the purpose of ensuring drainage, but it also raises the level of the perched water table, moving the level of saturated soil even higher in the container and closer to the roots.

Drilling holes in metal containers at Cocoa Cinnamon Demo Garden on Geer Street. (Image credit: Deborah Pilkington)

For gardeners with limited space, especially the newcomers to Durham’s condominiums and apartments with balconies, container gardening can bring some beauty and food to your home.  For urban container gardening inspiration, visit the International Award-Winning Master GardenerSM Container Demonstration Garden at Cocoa Cinnamon at Foster and Geer streets in Durham.

Get more ideas on container gardening by visiting the Cocoa Cinnamon Demonstration Garden at 420 West Geer Street in Durham, NC. (Image credit: Deborah Pilkington)

Resources and Additional Information

Check out the links below to learn more about plant hardiness zones including the history and factors used to determine the hardiness zone of an area. What does this really mean for North Carolina gardeners?

2023 USDA Plant Hardiness Zone Map | USDA Plant Hardiness Zone Map

Gardening Association of North Carolina – 2023 USDA Plant Zone Update (gaonc.org)

AN ILLUSTRATED HISTORY OF AMERICA’S PLANT HARDINESS ZONES (With a Closing Look at North Carolina) | by Tom Packer

For more information on perched water tables and soilless media check out the below online guide about drainage for containers.

How to Improve Drainage in Plant Pots, The Proper Way to Do It! – Deep Green Permaculture

If you want to take a deep dive into the physics of water movement in soilless media and media components, visit the following links.

Growing Media (Potting Soil) for Containers | University of Maryland Extension (umd.edu)

Homemade Potting Media (psu.edu) — How to make your own potting media

Learn more about choosing pots with the in-depth article below.

Containers, Pots, and Planters: What Material Is Best? (gardenerspath.com)

Article Short Link: https://wp.me/p2nIr1-4sZ